Custom Metal Home Address Sign, Tree Design

Custom metal personalized address sign/house numbers for your rock or wall with tree design. Finished with highly durable exterior matte black powder coating. This address sign is made out of highly quality durable/sturdy 1/8 inch thick steel(12gauge). This gives the item a very sturdy feel.

Sizing————
18 inch width – has 5 inch tall numbers and is roughly 9 inches tall. Total height will vary slightly depending on your address length. If you have more then 4 numbers in your address we might need to scale down the size of the numbers to fit the sign.

22 inch width – has 5 inch tall numbers and is roughly 9.5 inches tall. Total height will vary slightly depending on your address length.

32 inch width – has 7 inch tall numbers and is roughly 14 inches tall. Total height will vary slightly depending on your address length.
——————————————————————————-
Finish——-
We do not use cheap flimsy 18g, 16g, or 14g gauge metal. We use high quality 1/8 steel that is built to last. Each color option is a powder coated finish we offer is done with a exterior grade coating. Giving you a long lasting finish.

Bare metal is uncoated raw steel and will rust over time if left in this condition. This is a great option for a rustic finish or if you want to paint the sign yourself.
——————–
**This item is a metal sign that will mount to your rock or wall. No rock is incl with the purchase.**

Sign Layout ———————————
Item comes as shown in listing photos numbers are offset to the right. Upon request we can center the numbers or offset to the left. Just leave us a message at check out. We will send you a mock-up of the design. Failure to let us know you want a different number layout will result in the standard number placement which is right offset. This goes for one number or several they will always be offset to the right unless requested otherwise.

Type—–
– Posts for Rock mount – Comes with two posts welded on

– Wall Mount – Comes with two holes for mounting, welded on 1 inch standoffs to give you a floating look, and two wood screws.

– Flush Mount – Comes with two holes in to sign for mounting to the wall flush. The sign comes with two wood screws. *****No standoffs come with this version of the sign******

If the sign is ordered without the text on the bottom the size will have a shorter total height. This can be modified just leave a note at check out or reach out to us before you order.

This sign is built to mount to a rock by drilling 5/8 inch holes into your large rock and glued into place using fast setting construction adhesive. The sign has two post welded to the back side. The sign can also be made without the back post/rock install parts. This would allow the sign to mount to a wall. We do custom work as well. Made out of 12 gauge steel. Sign has a matte black powder coated finish. Size is 9.5 inch tall by 22 inch wide. The height varies depending on address length.

Policy ———————————

We will make our best judgement on the best length for your personalized text unless we hear from you with any size requirements or specific instructions. These must be present with your order (you can add notes in the cart before you proceed to checkout, email, or message us within 2 hour of your order. After the 2 hour mark, your order might be designed and cut and any instructions/cancelation will be invalid.) Buyer is responsible for verifying and inputting the correct spelling and information for personalization when placing the order and reviewing the mock-up. We will not wait for approval of the mock-up to make the sign after this time frame unless requested by the customer at check out. Purchasing of the item agrees to these terms.

Install Instructions——————————

Instructions:
1. Hold sign in place and mark post positions on rock
2. Drill holes using a roto hammer or hammer drill with a 5/8 or 3/4" masonry drill bit.
3. Clean holes out as best as possible.
4. Fill holes with your choice of concrete adhesive or hydraulic cement. Make sure adhesive is fast setting.
5. Hold sign in place till adhesive or cement sets. You can use blocking or string from a tree branch to hold the sign in place.
6. Wipe sign clean with a damp micro fiber towel.

All of our products are made in the USA with American made steel.

Free shipping excludes Hawaiian islands and Alaska. Please contact us before purchasing if you would like to ship to these areas. Additional cost may apply.

We are a family owned business located in Tacoma, WA. We provide high quality custom built metal work for your home or business. We strongly believe in supporting our community and local businesses. Our products make great gifts, or dcor for your home or business.

Visit and follow us on our Facebook page – or our website

Each sign has its own uniqueness due to the metal and paint conditions. We design, create, cut on our very own CNC, hand deburr, and apply the top finish to each piece . We make these incredible pieces from 16 and 12 gauge Steel for the ultimate durability. Each piece is uniquely treated by hand and sealed with a paint or powder coat for longevity. No two pieces are the same!

We love custom orders! Send us your idea and we can customize your order.

Custom order colors available but not limited to: natural metal, black, translucent color, and bronze.

Most of our pieces are hung with small nails using the existing art features as anchor points, or a pre cut hole. This way the art hangs flush with the wall and doesn9;t take away from the design. Larger, heavier pieces may require a screw. Upon request, pieces may come equipped with a mounting bracket on the back to hide hardware, or for an off the wall effect. If desired, additional holes can be added upon request at checkout at no extra charge. No hanging hardware incl.

If you are interested in custom orders please send a message and we can go over the idea, placement, and cost. Customized items must be approved by the buyer before building and shipping. Proofs are sent within 24 – 72 hours of ordering via . To avoid any delays in your order, please respond promptly. Without your approval we cannot start production on your order. Thank you so much for your interest. Have a great day!

All images are copyrighted by SJP Metalworks LLC. All rights reserved